Gallagher Solar Solar Powered Energiser S40
The S40 is the ultimate energiser for short fences up to 15 km (single wire, no vegetation). The energiser is supplied with a rechargeable battery and solar panel. The S40 is quick and easy to install and convenient to transport. This robust and highly mobile energiser offers an excellent alternative to battery-powered systems. We recommend buying the Gallagher stand(007509) to perfectly position your energiser to the sun. In addition, this energiser can be charged using a battery charger when there is insufficient sunlight or during storage.
Solid magnetic switch: conventional switches are often susceptible to dirt and moisture. The robust switch prevents the ingress of water and dirt.
Light and handy: the unit is easy to transport and install anywhere.
Daylight: the term "solar device" may be a little misleading, because this device also works perfectly in normal daylight (without sun). What's more, it even works for up to 3 weeks without direct sunlight!
Details Gallagher S40 (solar) energiser:
- Quick and easy to install
- Extremely powerful
- Built-in lightning protection
- Night saving mode
- Works for 3 weeks without sunlight
- Area size (hectare/acre): 2/5
- Battery power consumption (V/mA): 6/46
- IPX4 classification: Protection against water splashing from any direction
- Now with 7 years Gallagher warranty!
Always keep your energiser off the ground by mounting it on a stake (not included) or similar support for proper use.
Gallagher quality
To ensure you get a quality product when you buy the S40 Solar Powered energiser, Gallagher has a unique testing procedure.
Firstly, Gallagher puts its energisers through some extreme tests during their development. All energisers are dropped from a height of 1 metre. Each side of the energiser falls onto a hard concrete surface. The requirement of this test is that the device still functions and is protected by its housing.
Secondly, the model is subjected to a temperature stress test. The power supply unit should still function at -80 °C and +180 °C.
If the model passes these tests, it is ready for production.
To ensure that your new model delivers what it promises, it is tested for 24 hours before shipping. This ensures that it functions properly.