Gallagher Solar Solar Powered Energiser S16
The S16 is the ultimate energiser for short fences up to 4,5 km (single wire, no vegetation). The energiser is supplied with a rechargeable battery and solar panel. The S16 is quick and easy to install and convenient to transport. This robust and highly mobile energiser offers an excellent alternative to battery-powered systems. We recommend buying the Gallagher stand (007509) to perfectly position your energiser to the sun. In addition, this energiser can be charged using a battery charger when there is insufficient sunlight or during storage.
Top features of the Gallagher S16:
Solid magnetic switch: conventional switches are often susceptible to dirt and moisture. The robust switch prevents the ingress of water and dirt.
Light and handy: the unit is easy to transport and install anywhere.
Daylight: the term "solar device" may be a little misleading, because this device also works perfectly in normal daylight (without sun). What's more, it even works for up to 3 weeks without direct sunlight!
Details Gallagher S16 (solar) electric fence:
- Quick and easy to install
- Extremely powerful
- Built-in lightning protection
- Night saving mode
- Works for 3 weeks without sunlight
- Area size (hectare/acre): 0,8/2
- Battery power consumption (V/mA): 6/17
- IPX4 classification: Protection against water splashing from any direction
- Now with 7 years Gallagher warranty!
Always keep your energiser off the ground by mounting it on a stake or similar support for proper use.
Gallagher quality
To ensure you get a quality product when you buy the S16 Solar Powered energiser, Gallagher has a unique testing procedure.
Firstly, Gallagher puts its energisers through some extreme tests during their development. All energisers are dropped from a height of 1 metre. Each side of the energiser falls onto a hard concrete surface. The requirement of this test is that the device still functions and is protected by its housing.
Secondly, the model is subjected to a temperature stress test. The power supply unit should still function at -80 °C and +180 °C.
If the model passes these tests, it is ready for production.
To ensure that your new model delivers what it promises, it is tested for 24 hours before shipping. This ensures that it functions properly.