Electric Fence Accessories
Double insulated lead-out cable to connect the energizer with the fence and to make underground connections (e.g. gateways). Use this 10 m cable for short distances.
Double insulated lead-out cable to connect the energizer with the fence and to make underground connections (e.g. gateways). Use this 25 m cable for short distances.
Double insulated lead-out cable to connect the energizer with the fence and to make underground connections (e.g. gateways). Use this 50 m cable for short distances.
Double insulated lead-out cable to connect the energizer with the fence and to make underground connections (e.g. gateways). Use this 25 m cable for long distances.
Double insulated lead-out cable to connect the energizer with the fence and to make underground connections (e.g. gateways). Use this 50 m cable for long distances.
Double insulated lead-out cable to connect the energizer with the fence and to make underground connections (e.g. gateways). Use this 100m cable for long distances.
50 meter lead out XL cable coated with a heavy duty double insulation. Good quality polyethylene for abrasion resistance in the ground. 2,5 mm medium tensile aluminium coated wire 4 times the conductivity of 2,5 mm galvanized wire.
The Gallagher Fault Finder pinpoints faults quickly and easily whatever the wire type or energiser is used. Measure the voltage and ammeter.
- Volt and ammeter
- Display arrow points in the direction of the fault
- Saves valueable time
The Gallagher I-Series Fence Monitor allows you to monitor a separate section of your fence.
The Gallagher i Series Remote Control accurately measures fence voltages and current and finds the exact location of a fence fault quickly and easily.
- Suitable for the Gallagher energisers: B20, B35, BA20, BA30, BA40 & BA80
- Connect an energiser to a 12 V
- Suitable for the Gallagher energisers: B40, B50, B80, B100, B180, B200, B280, B300, S220 & S230
- Cable set to connect an energiser to the fence and earth
Connects a 9V/12 fence energiser to the fence, battery or earthing system.
Earth clamp: guarantees a good connection between the earth stakes and lead-out cable from the energizer.
Special rammer for convenient hammering in of a Gallagher Line post.
The Gallagher Screw-in Tie Down anchors Line Posts securely to the ground on hills and uneven surfaces. Its screw-in design ensures stability and reliability, making it ideal for varied terrain.
Supplies exact information on the condition of your fence. Makes targeted trouble shooting very easy and efficient. Helpful tool for checking earthing system.
Line Post Auger to easily place Gallagher Line Posts in hard ground.
The highly audible siren can be connected to any i-Serie energisers and be notified immediately if the circuit is broken.
Earthing can be achieved simply and quickly with this mix, even in extremely dry conditions. The mixture of salt and absorbent clay retains moisture and increases the conductivity of the surrounding soil.
This metal base bracket serves as a stand for your energizer and at the same time as
a grounding for a Gallagher S10, S16, S17, S20, S40, S100, S200 and S400 solar energiser.
Excellent connections between different lead-out cables are essential to prevent power loss.
By using this adapter you can install your Gallagher S10, S16 or S20 solar energiser on a Gallagher Ring top post.
A very handy and simple tester which can be attached to a key ring. Hold it close to an electric fence and it will give a loud beep if the fence is active.